We completed this project a little while ago, thought we would share it with our readers.

The start of the custom a-pillars. We created a small recessed area for a decorative trim we created to add some more detail to the a-pillar

We routered some custom rings out of 3/8″ aluminum, it took over 30 hours to create them.

We created MDF inserts for the rings.

Here you can see the finished tweeter ring with it’s insert, the custom made woodgrain insert and the stitching on the a-pillar.

We made a custom mount for the radio then had it as well as all the OEM burlwood redone.

A shot with all the OEM woodgrain panels redone in a Silver Burlwood. The process is done by a water transfer process.